Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> HVAC Systems - Automatic >> Repair Instructions >> Blower Motor Control Processor Replacement >> Removal Procedure

Removal Procedure

  1. Remove the right side I/P insulator. Refer to Closeout/Insulator Panel Replacement - Right in Instrument Panel, Gages and Console.
    2. Fig 1: Blower Motor & Electrical Connector
    GM295327Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the blower motor electrical connector.
  3. Remove the blower motor mounting screws.
  4. Remove the blower motor from the HVAC module assembly.
    5. Fig 2: Identifying Electrical Connector From The Blower Motor Control Processor Assembly
    GM295302Courtesy of GENERAL MOTORS CORP.
  5. Disconnect the electrical connector from the blower motor control processor assembly.
  6. Remove the forward blower control processor mounting screws.
  7. Remove the rearward blower control processor mounting screw.
    8. Fig 3: View Of Blower Control Processor Assembly
    GM295304Courtesy of GENERAL MOTORS CORP.
  8. Remove the blower control processor assembly from the HVAC module assembly.
scientia non olet · About Mike's Workshop Manuals