Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 331 (Lighting Systems) >> Repair Instructions >> Park/Turn Signal/Side Marker Lamp Bulb Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Sockets To Lamp
    GM64634Courtesy of GENERAL MOTORS CORP.
  1. Install the bulb to the socket.
  2. Install the socket to the lamp assembly.
    3. Fig 2: Brake Caliper Cooling Duct To Front Fascia
    GM171878Courtesy of GENERAL MOTORS CORP.
  3. Position the brake caliper cooling duct to the front fascia and press the duct toward the fascia to secure.
  4. Install the front fascia lower closeout panel. Refer to Close Out Panel - Front Bumper Fascia Lower in Bumpers.
  5. Lower the vehicle.
scientia non olet · About Mike's Workshop Manuals