Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 323 (Battery, Charging System & Starting System) >> Repair Instructions >> Battery Tray Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Battery Tray Bolts
    GM675718Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the battery tray.
  2. Install the battery tray bolts.

    Tighten:  Tighten the battery tray bolts to 12 N.m (106 lb in).

  3. Install the battery. Refer to Battery Replacement .
scientia non olet · About Mike's Workshop Manuals