Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 298 (Automatic Transaxle - 4T65-E (Introduction, Service & Replacement)) >> Repair Instructions >> Pressure Control Solenoid (PCS) Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Pressure Control Solenoid (PCS) Assembly
    GM49378Courtesy of GENERAL MOTORS CORP.
  1. Install the pressure control solenoid (322).
  2. Install the pressure control solenoid retaining clip (314E).
  3. Connect the pressure control solenoid electrical connector.
  4. Install the case side cover. Refer to Case Side Cover Replacement .