Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 267 (Seat System) >> Repair Instructions >> Seat Back Heater Element Replacement - Front >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Peel off the self-stick tape from the heater element.
    2. Fig 1: Front Seat Back Heater Element & Electrical Connector
    GM1466651Courtesy of GENERAL MOTORS CORP.
  2. Position the heater element over the seat back. Press firmly to engage the adhesive.
  3. Route and connect the electrical connector to the seat back cushion. Secure the wire with tie straps.
  4. Install the seat back cover. Refer to Seat Back Cover Replacement - Front (Fold Flat)  or Seat Back Cover Replacement - Front (Except Fold Flat) .
  5. Install the front seat. Refer to Seat Replacement - Front Bucket .
scientia non olet · About Mike's Workshop Manuals