Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (Supplemental Inflatable Restraint System) >> Diagnostic Tests >> DTC B1001: Option Configuration Error >> Conditions For Setting DTC

Conditions For Setting DTC

WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

DTC sets when Ignition 1 (IGN1) voltage is within normal operating range and restraints identification stored in SDM does not match restraints identification stored in BCM and/or VIN stored in SDM does not match VIN stored in PCM.

scientia non olet · About Mike's Workshop Manuals