Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 232 (HVAC Systems - Manual) >> Repair Instructions >> Recirculation Actuator Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the right instrument panel (I/P) insulator. Refer to Closeout/Insulator Panel Replacement - Right in Instrument Panel, Gages, and Console.
  2. Remove the I/P compartment. Refer to Compartment Replacement - Instrument Panel (I/P) in Instrument Panel, Gages, and Console.
  3. Disconnect the electrical connector from the recirculation actuator.
  4. Remove the screws that secure the recirculation actuator to the HVAC module assembly.
  5. Remove the recirculation actuator from the HVAC module assembly.
    6. Fig 1: Recirculation Actuator
    GM1194922Courtesy of GENERAL MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals