Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 204 (Seat System) >> Repair Instructions >> Seat Back Recliner Replacement - Front >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the front seat recliner assembly to the front seat cushion frame.
    2. Fig 1: Installing Front Seat Recliner Assembly
    GM526604Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: New roll pins must be used.
  2. Install the new roll pins to the front seat recliner assembly.
    3. Fig 2: Roll Pins & Hinge
    GM523811Courtesy of GENERAL MOTORS CORP.
  3. Pull back the front seat cushion cover. Refer to Seat Cushion Cover Replacement - Front (Bucket Seat)  or Seat Cushion Cover Replacement - Front (Split Bench) .
  4. Pull back the front seat back cover. Refer to Seat Back Cover Replacement - Front .
  5. Install the front seat to the vehicle. Refer to the following procedures:
scientia non olet · About Mike's Workshop Manuals