Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 189 (Door System, Mirror System & Window System) >> Repair Instructions >> Motor Replacement - Power Mirror >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the door trim panel. Refer to Trim Panel Replacement - Side Front Door (Impala)  or Trim Panel Replacement - Side Front Door (Monte Carlo) .
  2. Disconnect the electrical connector to the mirror wire harness.
  3. Fig 1: Mirror Wire Harness & Electrical Connector
    GM164499Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Eye Protection Caution in Cautions and Notices.
  4. Remove the mirror face. Refer to Mirror Face Replacement .
  5. Remove the screws from the mirror motor.
  6. Pull the motor electrical harness through the mirror housing.
  7. Remove the motor from the mirror housing.
  8. Fig 2: Removing Mirror Motor
    GM742277Courtesy of GENERAL MOTORS CORP.