Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 188 (Lighting Systems) >> Repair Instructions >> Tail Lamp Replacement (Impala) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the bulb to the tail lamp socket.
  2. Install the bulb to the sidemarker lamp socket.
  3. Install the sidemarker lamp socket, turning clockwise.
  4. Install the tail lamp socket, turning clockwise.
  5. Connect the electrical connector to the tail lamp.
    6. Fig 1: Tail Lamp Electrical Connector (Impala)
    GM458187Courtesy of GENERAL MOTORS CORP.
  6. Install the tail lamp to the rear body panel.
  7. Install the wingnuts to the tail lamp.
  8. Pull back the rear compartment trim panel to the tail lamp and install the wingnut.
    9. Fig 2: Tail Lamp & Components (Impala)
    GM458190Courtesy of GENERAL MOTORS CORP.
  9. Close the rear compartment.
scientia non olet · About Mike's Workshop Manuals