Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.

Install the fog lamp bulb, turning clockwise.
Connect the electrical connector to the fog lamp.

Fig 1: Fog Lamp Bulb Electrical Connector (Impala)

Courtesy of GENERAL MOTORS CORP.

Install the fog lamp to the front bumper fascia.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the screw to the fog lamp.
Tighten: Tighten the screws to 5 N.m (44 lb in).

Fig 2: Installing Fog Lamp To Front Bumper Fascia (Impala)

Courtesy of GENERAL MOTORS CORP.