Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 188 (Lighting Systems) >> Repair Instructions >> Emergency Vehicle Headlamp Flasher Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the headlamp flasher (1) to the front radiator support (2).
  2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the headlamp flasher bolts.

    Tighten:  Tighten the bolts to 10 N.m (89 lb in).

  4. Connect the electrical connectors.
  5. Fig 1: Headlamp Flasher Components
    GM803390Courtesy of GENERAL MOTORS CORP.
  6. Install the upper radiator baffle. Refer to Radiator Air Baffle and Deflector Replacement - Upper in Engine Cooling.