Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 152 (HVAC Systems - General Servicing) >> Repair Instructions >> Blower Motor Resistor Assembly Replacement >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the right closeout/insulator panel. Refer to Closeout/Insulator Panel Replacement - Right in Interior Trim.
    2. Fig 1: Blower Motor Resistor
    GM759902Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the blower motor resistor electrical connector (3).
  3. Remove the blower motor resistor mounting screws (2).
  4. Remove the blower motor resistor (1).
scientia non olet · About Mike's Workshop Manuals