Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Fluid Level Sensor Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Disconnect the electrical connector from the fluid level sensor.

IMPORTANT: When performing the following service procedure, it is NOT necessary to drain the master cylinder reservoir.

Fig 2: Compressing Locking Tabs For Fluid Sensor

Courtesy of GENERAL MOTORS CORP.

Using pair of needle nose pliers, compress the locking tabs for the fluid sensor located at the opposite side of the master cylinder.

Fig 3: Removing/Installing Fluid Level Sensor

Courtesy of GENERAL MOTORS CORP.

Remove the fluid level sensor from the master cylinder reservoir.