Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 123 (Body Front End) >> Repair Instructions >> Hood Latch Replacement >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the grille. Refer to Grille Replacement (Envoy, Envoy XUV) , Grille Replacement (TrailBlazer) , Grille Replacement (Bravada) or Grille Replacement (Rainier) in Exterior Trim.
    2. Fig 1: Identifying Hood Latch-To-Support Bracket Bolts
    GM749964Courtesy of GENERAL MOTORS CORP.
  2. Using a grease pencil or other suitable marking device, mark the location of the latch on the mounting bracket.
  3. Remove the bolts that retain the latch to the mounting bracket.
    4. Fig 2: Disconnecting Hood Latch Cable From Latch
    GM742161Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the hood latch cable from the latch.
  5. Remove the latch from the vehicle.
scientia non olet · About Mike's Workshop Manuals