Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 110 (Lighting Systems) >> Repair Instructions >> Tail Lamp Bulb Replacement >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the tail lamp assembly. Refer to Tail Lamp Replacement .
  2. Remove the tail lamp circuit board. Refer to Tail Lamp Circuit Board Replacement .
  3. Place the tail lamp assembly onto a clean prepared surface.
    4. Fig 1: Removing/Installing Tail Lamp Bulb
    GM743393Courtesy of GENERAL MOTORS CORP.
  4. Pull the bulb straight out in order to remove the tail lamp bulb from the socket assembly.
scientia non olet · About Mike's Workshop Manuals