Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 110 (Lighting Systems) >> Repair Instructions >> Backup Lamp Replacement (GMC) >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing/Installing Backup Lamp (GMC)
    GM742559Courtesy of GENERAL MOTORS CORP.
  1. Install the back up lamp to the fascia.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the 2 backup lamp retaining nuts.

    Tighten:  Tighten the nuts to 10.0 N.m (88 lb in).

  3. Install the backup lamp socket.
scientia non olet · About Mike's Workshop Manuals