Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 105 (Instrument Panel System Displays, Gauges And Console) >> Repair Instructions >> Console Storage Bin Replacement >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing/Installing Console Storage Bin
    GM741607Courtesy of GENERAL MOTORS CORP.
  1. Install the storage bin to the console.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the 6 screws that retain the storage bin to the console.

    Tighten:  Tighten the screws to 2.5 N.m (22 lb in).

  3. Install the rubber mats covering the retaining screws.
  4. Close the storage bin cover.
scientia non olet · About Mike's Workshop Manuals