Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> Electrical >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Instrument Panel (I/P) Compartment Hinge Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Instrument Panel Compartment Hinge Bolts
    GM631061Courtesy of GENERAL MOTORS CORP.
  1. Fasten the hinge to the lower compartment trim panel with new rivets.
  2. Install the lower I/P compartment trim panel.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Align the I/P compartment door with the hinge assembly and secure with the I/P compartment screws.

    Tighten:  Tighten the screws to 4 N.m (3 lb in)

  4. Verify the alignment of the I/P compartment door.
  5. Close the I/P compartment door.
scientia non olet · About Mike's Workshop Manuals