Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> Body & Frame >> Windows >> Door System, Mirror System & Window System >> Repair Instructions >> Rubber Conduit Replacement - Front Door >> Removal Procedure

Removal Procedure

  1. Remove the left or right instrument panel insulator as required. Refer to Closeout/Insulator Panel Replacement - Left or Closeout/Insulator Panel Replacement - Right .
  2. Disconnect the electrical from the front door wiring harness.
  3. Remove the door rubber conduit from where it attaches at the windshield pillar.
    Fig 1: Front Door Rubber Conduit
    GM319803Courtesy of GENERAL MOTORS CORP.
  4. Remove the conduit from the front door.
  5. Remove the front door wiring harness out from the rubber conduit.
scientia non olet · About Mike's Workshop Manuals