Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting Systems >> Repair Instructions >> Stop Lamp Switch Replacement >> Removal Procedure

Removal Procedure

  1. Remove the left side instrument panel insulator. Refer to Closeout/Insulator Panel Replacement - Left in Instrument Panel, Gages and Console.
  2. Disconnect the electrical connectors.
    3. Fig 1: Locating Stop Lamp Switch & Cruise Control Switch
    GM180295Courtesy of GENERAL MOTORS CORP.
  3. Remove the stop lamp switch (1) from the brake pedal bracket by turning the switch counterclockwise approximately 1/4 turn, and pulling back.
scientia non olet · About Mike's Workshop Manuals