Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting Systems >> Repair Instructions >> Fog Lamp Switch Replacement - Front >> Installation Procedure

Installation Procedure

    Fig 1: View Of Headlamp Switch Electrical Connector
    GM629224Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connector to the fog lamp switch.
    2. Fig 2: Locating Headlamp Switch
    GM629226Courtesy of GENERAL MOTORS CORP.
  2. Position the fog lamp switch to the retainers in the I/P carrier.
  3. Install the fog lamp switch to the I/P carrier. Press the switch into place until fully seated.
  4. Install the I/P cluster trim plate bezel. Refer to Trim Plate Bezel Replacement - Instrument Panel (I/P) Cluster (Aztek) or Trim Plate Bezel Replacement - Instrument Panel (I/P) Cluster (Rendezvous) in Instrument Panel, Gages and Console.
scientia non olet · About Mike's Workshop Manuals