Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2003 >> Vibe Base, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Repair Instructions >> Cruise Control Servo Replacement >> Removal Procedure

Removal Procedure

  1. Disengage the 2 tabs (2) on the cruise control cover (1)
  2. Remove the cruise control servo cover (1).
    Fig 1: Removing Cruise Control Servo Cover
    G01434265Courtesy of GENERAL MOTORS CORP.
  3. Loosen the accelerator control cable locknuts (2).
  4. Remove the following components from the cruise control servo:
    • The cruise control servo cable bracket screw (5)
    • The cruise control servo cable (4)
    • The accelerator control cable (3)
      Fig 2: Removing Components From Cruise Control Servo
      G01434266Courtesy of GENERAL MOTORS CORP.
  5. Disconnect the cruise control servo electrical connector (3).
  6. Remove the following components from the vehicle:
    • The 2 cruise control servo mounting bolts (2)
    • The cruise control servo (1) with the bracket attached
      Fig 3: Removing Cruise Control Servo With Bracket
      G01434267Courtesy of GENERAL MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals