Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2003 >> Sunfire Standard >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Removal & Installation >> Fuel Systems (Gasoline) >> Fuel Sender Assembly >> Installation

Fuel Sender Assembly: Installation

  1. Install the fuel level sensor to the fuel sender assembly. See FUEL LEVEL SENSOR .
  2. Install the new seal on the fuel tank (4). See Figure.
  3. Align the fuel pipes parallel with the mark on the fuel tank.
  4. Slowly apply pressure to the top of the spring loaded sender until the sender aligns flush with the retainer on tank.
  5. Install the retaining ring (1) using the fuel sender lock nut wrench.
  6. Connect the wiring harness to the fuel sender and the FTP sensor.
  7. Install the fuel tank. See FUEL TANK (GASOLINE) .
scientia non olet · About Mike's Workshop Manuals