Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2003 >> Sunfire Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Body Control Modules) >> Diagnostic Tests >> DTC B1001: Option Configuration Error >> Description

DTC B1001: Option Configuration Error: Description

WARNING: This page is about a different car, the 2002 Pontiac Sunfire, 2002 Chevrolet Cavalier, 2001 Pontiac Sunfire, and 2001 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.

Body Control Module (BCM) can be configured with applicable vehicle options. DTC B1001 will set if BCM was not configured either at assembly plant or after replacement. A current DTC B1001 will clear when BCM is properly programmed, or after 100 ignition cycles with condition no longer existing.

scientia non olet · About Mike's Workshop Manuals