Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2003 >> Sunfire Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Body Control System >> Diagnostic Information and Procedures >> DTC B1001: Module Is Not Configured Properly >> Test Description

Test Description

The number below refers to the step number on the diagnostic table.

  1. If DTC B1001 is set as current, reprogram the module.
    Fig 1: Diagnostic System Check - DTC B1001
    G01559176Courtesy of GENERAL MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals