Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Bonneville. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Locating Yaw Rate Sensor

Courtesy of GENERAL MOTORS CORP.

Install the yaw rate sensor electrical connector (3).
Install the yaw rate sensor to the mounting bracket.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the yaw rate sensor (2) nuts.
Tighten: Tighten the 2 yaw rate sensor mounting nuts (1) to 6 N.m (53 lb in).
Perform the ABS Diagnostic System Check. Refer to Diagnostic System Check - ABS .