Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2003 >> Aztek AWD >> Repair and Diagnosis >> Suspension >> Electronic Suspension >> Suspension Control System - Suspension Leveling >> Repair Instructions >> Air Compressor Shield Replacement >> Removal Procedure

Removal Procedure

  1. Raise and support the vehicle.
  2. Lower the ALC. air compressor assembly. Refer to AIR COMPRESSOR REPLACEMENT  .
  3. Remove the ALC shield bolt (1) and retainers.
    Fig 1: Removing ALC Shield Bolt And Retainers
    G01499750Courtesy of GENERAL MOTORS CORP.
  4. Remove the ALC shield (2) from the vehicle.
    Fig 2: Removing ALC Shield From Vehicle
    G01499751Courtesy of GENERAL MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals