Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2003 >> Aztek AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 53 (Automatic Transmission Servicing) >> Removal & Installation >> Input Speed Sensor (4T65-E) >> Installation

Input Speed Sensor (4T65-E): Installation

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the input speed sensor (440) into the case cover. See Figure .
  2. Install the input speed sensor clip (441) into the case cover.
  3. Connect the transaxle wiring harness.
  4. Install the case side cover. See CASE SIDE COVER (4T65-E)  .
scientia non olet · About Mike's Workshop Manuals