Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2003 >> Aztek AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 145 (Body Control Modules) >> Diagnostic Tests >> DTC B1001: Instrument Panel Module Not Calibrated To Vehicle >> Test Procedure (Radio)

Test Procedure (Radio)

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
  1. If diagnostic system check for radio has been performed, go to next step. If diagnostic system check for radio has not been performed, perform radio diagnostic system check. See RADIO/AUDIO SYSTEM DIAGNOSTIC SYSTEM CHECK  under SELF-DIAGNOSTIC SYSTEM.
  2. Perform RADIO SETUP procedure or VIN RELEARN under radio special functions menu on scan tool. Cycle ignition switch from OFF to RUN positions. If DTC B1001 resets in radio, replace radio.