Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2003 >> Aztek AWD >> Repair and Diagnosis >> Electrical >> Gauges >> Instrument Panel, Gages, And Console >> Repair Instructions >> Console Replacement - Front Floor (Aztek) >> Installation Procedure

Installation Procedure

  1. Align the front floor console to the floor.
  2. Connect the required electrical connectors.
    Fig 1: Aligning Front Floor Console To Floor
    G01517795Courtesy of GENERAL MOTORS CORP.
  3. Install the nuts to the front of the front floor console.

    Tighten 

    Tighten the nuts to 6 N.m (53 lb in)

    Fig 2: Installing Nuts To Front Of Front Floor Console
    G01517796Courtesy of GENERAL MOTORS CORP.
  4. Install the nuts to the rear of the front floor console

    Tighten 

    Tighten the nuts to 6 N.m (53 lb in).

  5. Install the front floor console trim plate. Refer to TRIM PLATE REPLACEMENT - FRONT FLOOR CONSOLE (AZTEK)  or TRIM PLATE REPLACEMENT - FRONT FLOOR CONSOLE (RENDEZVOUS)  .
    Fig 3: Installing Nuts To Rear Of Front Floor Console
    G01517797Courtesy of GENERAL MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals