Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2003 >> Aztek AWD >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System & Washer System >> Repair Instructions >> Washer Solvent Container Level Sensor Replacement >> Removal Procedure

Removal Procedure

  1. Open the hood.
  2. Drain the washer solvent from the washer solvent container.
  3. Disconnect the washer solvent container level sensor electrical connector.
    Fig 1: Disconnecting Washer Solvent Container Level Sensor Electrical Connector
    G01517334Courtesy of GENERAL MOTORS CORP.
  4. Using a small flat-bladed tool, remove the washer solvent container level sensor and seal from the washer solvent container.
    Fig 2: Removing Washer Solvent Container Level Sensor And Seal
    G01517335Courtesy of GENERAL MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals