Customizing Content Theft Deterrent System

Turn ignition switch to RUN position to disarm system. Turn ignition switch to OFF position. Remove RADIO fuse No. 17 (15-amp) from instrument panel fuse block. See Figure. Instrument panel fuse block is located behind left side of dash. See Figure. Turn ignition switch to ACC position. Chime will sound, indicating programming mode has been entered.

One chime indicates exit lighting, delayed illumination, last door closed locking and lockout prevention can be customized. Two chimes indicate remote lock control verification, arming method, arming verification, driver's door delay and shock sensor enable/disable can be customized.