Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2002 >> Aztek AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 703 (On-Board Diagnostic [Engine Control System]) >> On-Board Diagnostic Test >> PID/DATA Monitor and Record Procedure

PID/DATA Monitor and Record Procedure

WARNING: This page is about a different car, the 2004 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Perform the necessary vehicle preparation and visual inspection.
  2. Connect the WDS or equivalent to the vehicle DLC-2 16-pin connector located in the driver compartment.
  3. Access and monitor the PIDs using the WDS or equivalent.
    Fig 1: Identifying DLC-2 Connector Location
    G00974366Courtesy of MAZDA MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals