Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2002 >> Aztek AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1328 (Instrument Panel, Gages, And Console) >> Repair Instructions >> Console Replacement (Pro) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 GMC Sierra, 2003 GMC Cab & Chassis Sierra, 2003 Chevrolet Silverado, and 2003 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place the console on the bracket.
  2. Connect all the wire connectors.
    NOTE: Refer to FASTENER NOTICE .
  3. Install the 6 console retaining bolts (1) to the I/P extension.

    Tighten 

    Tighten the 6 retaining bolts to 1.6 N.m (14 lb in).

  4. Install the console lid and bin assembly. Refer to Console Storage Bin Replacement (Expect Pro)   or Console Storage Bin Replacement (Pro)   . 
  5. Install the cupholder assembly. Refer to Cupholder Replacement (Luxury)   or Cupholder Replacement (Non-Luxury)   or Cupholder Replacement (Rear)   or Cupholder Replacement (Pro)   . 
    Fig 1: Console (Pro)
    G01579485Courtesy of GENERAL MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals