Installation Procedure
WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the battery negative cable (2) to the battery.
Tighten: Tighten the battery negative terminal bolt to 16 N.m (12 lb ft).
- Unlock the Theftlock® radio (if applicable).
- Program the radio stations back into the radio as recorded at the beginning of the procedure.
- Set the clock to the current time. Refer to Radio/Audio System Description and Operation in Entertainment.
NOTE:
Refer to Fastener Notice
in Cautions and Notices.
IMPORTANT:
Clean any existing oxidation from the contact surface of the battery cable using a wire brush before installing the battery cable to the battery.