Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2001 >> Aztek Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1400 (HVAC Systems - Automatic) >> Repair Instructions >> Inside Air Temperature Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Buick Regal and 2003 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument panel cluster (IPC) trim plate. Refer to TRIM PLATE BEZEL REPLACEMENT - INSTRUMENT PANEL (I/P) CLUSTER in Instrument Panel, Gages, and Console.
  2. Remove the electrical connection at the air temperature sensor.
  3. Remove the air temperature sensor from the aspirator hose.
    Fig 1: Removing Inside Air Temperature Sensor From Aspirator Hose
    G01569073Courtesy of GENERAL MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals