Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 980 (Front Drive Axle) >> Repair Instructions >> Lubricant Replacement - Front Drive Axle >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the drain plug.

    Tighten:  Tighten the drain plug to 33 N.m (24 lb ft).

  2. Fill the differential carrier assembly with axle lubricant. Use the correct fluid. Refer to Capacities - Approximate Fluid in Maintenance and Lubrication and Sealers, Adhesives, and Lubricants .
  3. Install the fill plug.

    Tighten:  Tighten the fill plug to 33 N.m (24 lb ft).

    4. Fig 1: Front Drive Axle Lubricant Drain Plug
    GM834237Courtesy of GENERAL MOTORS CORP.
  4. Install the front differential carrier shield, if equipped. Refer to Shield Replacement .
  5. Lower the vehicle.
scientia non olet · About Mike's Workshop Manuals