Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 944 (Engine Controls - 6.6L (LLY) (Introduction)) >> Repair Instructions >> Air Cleaner Element Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Air Cleaner Housing Assembly
    GM858229Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the air filter element into the lower air cleaner housing.
  2. Install the upper housing cover and tighten the screws.

    Tighten:  Tighten the screws to 4 N.m (35 lb in).

  3. Fig 2: Mass Air Flow (MAF)/Intake Air Temperature (IAT) Sensor Electrical Connector
    GM877698Courtesy of GENERAL MOTORS CORP.
  4. Connect the MAF/IAT sensor electrical connector (1).