Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 921 (Lighting Systems) >> Repair Instructions >> Tail/Turn Signal Lamp Replacement (Except Stepside) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the socket.
  2. Lock the socket in place.
  3. Install the tail/turn signal lamp assembly to the vehicle with the 2 screws.
    4. Fig 1: Installing Tail/Turn Signal Lamp (Except Stepside)
    GM348719Courtesy of GENERAL MOTORS CORP.
  4. Close the endgate.
    5. Fig 2: Tail/Turn Signal Lamp (Except Stepside)
    GM348718Courtesy of GENERAL MOTORS CORP.
  5. Inspect the operation.
scientia non olet · About Mike's Workshop Manuals