Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 921 (Lighting Systems) >> Repair Instructions >> Hazard and Turn Signal Flasher Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the flasher (1) to the fuse block until the retainer clicks into place.
    2. Fig 1: Installing Hazard & Turn Signal Flasher
    GM786886Courtesy of GENERAL MOTORS CORP.
  2. Install the knee bolster. Refer to Knee Bolster Replacement in Instrument Panel, Gages and Console.
scientia non olet · About Mike's Workshop Manuals