Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 896 (Wiper System And Washer System) >> Repair Instructions >> Wiper Arm Blade Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.

Important:  Do not allow the wiper arm to fall back and strike the windshield.

  1. Lift the wiper arm until it locks in the vertical position.
  2. Push in the locking tab of the wiper blade clip and pull downward on the wiper arm blade.
    Fig 1: Pushing In Locking Tab Of Wiper Blade Clip & Pulling Downward On Wiper Arm Blade
    G01476413Courtesy of GENERAL MOTORS CORP.
  3. Remove the wiper blade from the inside radius of the wiper arm.
  4. Bring the wiper arm out through the opening in the wiper blade.
    Fig 2: Removing Wiper Blade From Inside Radius Of Wiper Arm
    G01476414Courtesy of GENERAL MOTORS CORP.