Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 863 (Lighting Systems) >> Repair Instructions >> Hazard & Turn Signal Flasher Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the hazard and turn signal flasher into the fuse panel.
  2. Install the fuse panel cover.
    Fig 1: Hazard & Turn Signal Flasher Installation
    G01515437Courtesy of GENERAL MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals