Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 854 (Engine Exhaust System) >> Repair Instructions >> Catalytic Converter Heat Shield Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the catalytic converter heat shield.
  2. Install the catalytic converter heat shield to the vehicle with new rivets.
  3. Install the catalytic converter. Refer to CATALYTIC CONVERTER REPLACEMENT  .
  4. Lower the vehicle.
scientia non olet · About Mike's Workshop Manuals