Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 853 (Wiper System & Washer System) >> Repair Instructions >> Washer Solvent Container Level Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the hood.
  2. Drain the washer solvent from the washer solvent container.
  3. Disconnect the washer solvent container level sensor electrical connector.
    Fig 1: Disconnecting Washer Solvent Container Level Sensor Electrical Connector
    G01517334Courtesy of GENERAL MOTORS CORP.
  4. Using a small flat-bladed tool, remove the washer solvent container level sensor and seal from the washer solvent container.
    Fig 2: Removing Washer Solvent Container Level Sensor And Seal
    G01517335Courtesy of GENERAL MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals