Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 841 (Engine Mechanical) >> Repair Instructions >> On-Vehicle Repair Instructions >> Engine Flywheel Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the engine flywheel and bolts

    Tighten 

    Tighten bolts to 71 N.m (52 lb ft).

  2. Install the automatic transaxle. Refer to TRANSMISSION REPLACEMENT .
    Fig 1: Installing Engine Flywheel And Bolts
    G01500596Courtesy of GENERAL MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals