Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 712 (Door System, Mirror System & Window System) >> Repair Instructions >> Sealing Strip Replacement-Rear Door Window Belt Inner >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear door trim panel. Refer to Trim Panel Replacement - Side Rear Door .
  2. Pull upward on the inner belt sealing strip (1) in order to disengage it from the door flange.
  3. Remove the rear door inner belt sealing strip from the door.
    Fig 1: Removing Rear Door Inner Belt Sealing Strip
    G01780387Courtesy of GENERAL MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals