Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (Shift Interlock Systems) >> Removal & Installation >> STOPLAMP Switch >> Installation

STOPLAMP Switch: Installation

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora and 2001 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the stoplamp switch electrical connectors (2). See Figure .
  2. Install the stoplamp switch into the retainer.
  3. Press the switch (2) into the retainer until the switch plunger is fully depressed into the switch barrel. See  3 .
  4. Rotate the switch (2) clockwise until travel has stopped and the switch locks fully into position. Install sound insulator.
scientia non olet · About Mike's Workshop Manuals