Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 190 (Automatic Transaxle Servicing) >> Removal & Installation >> Vehicle Speed Sensor >> Removal

Vehicle Speed Sensor: Removal

WARNING: This page is about a different car, the 2003 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle.
  2. Remove the electrical connector at the vehicle speed sensor.
  3. Remove the retaining stud and the sensor. See Fig 1 . Pull straight out in order to avoid damage to the case.
Fig 1: Removing & Installing VSS Assembly
G00088295Courtesy of GENERAL MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals