Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1534 (Power Door Lock System And Release Systems) >> Repair Instructions >> Liftgate Bumper Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Lift Gate Bumper
    GM930671Courtesy of GENERAL MOTORS CORP.
  1. Position the lift gate bumper on the lift gate.
  2. Install the rivets into the lift gate.
  3. Close the lift gate, checking for proper engagement of the lift gate bumper to the body.
scientia non olet · About Mike's Workshop Manuals